Mach3 5 Axis Screenset Download ((FREE))
I started with a mach4 screen using the mach4 screenset, just going through the mach4 screen and making sure I had all my settings set right. Once I was set up, I copied the mach4 screen into the mach3 folder, and opened up the machine.cfm file (located in the mach3 folder) in mach3. Then I went to the Mach3 setting section, and made sure that the Enable Mach3 button was checked and that the Mach3 Screen was set to the mach4 screenset.
mach3 5 axis screenset download
Using ModMCU - To make my mach3 screenset work with ModMCU, I had to modify some of the mach3 machine.cfm file. In the mach3 section, I changed the line machine.toolpath.speed to tool.speed, and in the mach3 section, I changed the line machine.temperature to heat.temperature. I also updated the line to machine.temperature.limit and added set.temperature.limit for ModMCU. Finally, in the mach4 section of the mach3 machine.cfm, I changed the line mach4.temperature to temp.temperature and mach4.temperature.limit to temp.limit.
However, note that you will need to send the new configuration data and the image file that was created by the prototype install into the new screen set. If you have a maching expert, you can send this data via e-mail. The basic data is on the Mach3 GUI. The data is also available in the.plist file.